July 21, 2024
PlumbingBathroom Remodel & ImprovementCleaning

4 possible causes toilet swirls but won t flush – and how to fix them!

Is your toilet swirls but won t flush? If so, you are not alone. Many people experience this issue and it can be very frustrating. Fortunately, there are a few possible reasons and solutions to this problem. In this blog post, we will look at five possible causes of a toilet that won’t flush and how to fix them. Keep reading to learn more about what might be causing your toilet to not flush and the steps you can take to fix it.

1) Clogged Pipes

5 Steps How to Unclog Bathtub Drain Full of Hair

The number one reason of toilet swirls but won t flush is clogged pipes. If your toilet flushes slowly and incompletely, it’s possible that the pipes connecting the toilet to your sewer are clogged. If your toilet flush now swirls but won’t actually flush, this could be the problem. To find out if this is the case, you’ll need to use a plumbing snake to locate the clog and remove it. If you don’t have the experience or skills to do this yourself, you should call a professional plumber. you can also read our article about How to Unclog a Toilet With Salt in 5 Easy Steps.

2) Loose Chain

One of the possible causes for a toilet swirls but won t flush properly is a loose chain. A toilet flush chain is attached to the flapper and the handle, and when it is pulled, the flapper opens and allows the water to flow from the tank into the bowl. If the chain has become loose, the water will not flow freely, causing the toilet to flush slowly or incompletely. Additionally, the loose chain may cause the toilet to swirl instead of emptying out the bowl when flushed.

How to fix a loose chain of toilet that swirls but won’t flush

  1. you should first ensure that the flapper and handle are properly connected
  2. the chain should be in place
  3. Then, adjust the length of the chain
  4. when it is pulled the flapper lifts up at least an inch or two
  5. This should help to restore your toilet’s flushing power and prevent it from flushing slowly and incompletely

3) Clogged Toilet Bowl

drain snake

If your toilet flushes slowly and incompletely, or now toilet swirls but won t flush, the likely culprit is a clogged toilet bowl. A clogged toilet bowl occurs when too much material is flushed at once, and that material gets stuck in the bottom of the bowl. This can be anything from too much toilet paper to foreign objects like toys that have been flushed by accident.

To remedy this issue, you will need to first check for the clog. If you can see the clog, use a plunger to try to remove it. You may also need to remove the toilet tank lid and use a plumbing snake to break up and dislodge the clog. If your clog is too far down the drain, you may need to call a plumber.

Alternatively, you could consider installing a Saniflo toilet, which is a type of macerating toilet system. Saniflo toilets are designed to handle waste and sewage in situations where traditional plumbing isn’t easily accessible or feasible. These toilets use a macerator pump to grind the waste into a fine slurry, which can then be pumped through small-diameter pipes to reach the main sewage system. Installing a Saniflo toilet can provide a solution for homes or spaces where conventional plumbing installations are challenging.

Once the clog has been cleared or if you decide to install a Saniflo toilet, it is important to monitor your toilet usage to ensure that no further blockages occur. Flushing too much material at once may result in subsequent obstructions. Non-biodegradable items such as paper towels and feminine hygiene products should not be flushed.

Following the removal of the clog, it is critical to monitor your toilet usage to ensure that no future obstructions form. Flushing too much material at once may result in subsequent obstructions. Non-biodegradable items such as paper towels and feminine hygiene products should not be flushed.

4) Broken Flush Lever

If your toilet swirls but won t flush but won’t actually flush, it could be due to a broken flush lever. This is the handle attached to the side of your toilet tank that you use to flush. When the flush lever is broken, it can no longer activate the flushing mechanism, causing your toilet to swirl but not flush.

To diagnose this problem, take a look at your flush lever and inspect for any visible signs of damage such as cracks or breaks. If it is bent or seems out of place, then it could be the cause of your toilet not flushing properly.

You can usually fix a broken flush lever by replacing it with a new one. This is an easy DIY project that you can do yourself using basic tools and supplies. Just make sure to get the correct replacement part for your toilet before beginning the repair. Once you have the new part installed, your toilet should flush properly again.

5) Broken toilet pipes

Using a PVC Pipe Cutter

there is a little bit possibility of that your toilet pipes can be broken and suck up the air when you flush them. a normal man cannot identify this problem by himself so you need to call a professional or need the help of a friend who has experience of doing work like that. because to fix this kind of problem there is going to be a lot of mess in your washroom. maybe you have to change all the pipes because of this problem.

Also, visit Home Design Looks for more quality information.

Leave a Reply

Your email address will not be published. Required fields are marked *